Identipet Office
Email: info@identipet.com
Tel: (011)957-3455/6
Fax: (011)957-2784
Alt Fax: 086 671 9189
Cell-emerg: (082)957-3455
Dr. Bruce Finnemore
Email: bruce@identipet.com
Cell: (082)610-0323
-
SMART™: (Standard Memory And Re-Programmable Technology) The scanners incorporate an integrated circuit which allows them to be re-programmed. Through the use of SMART software, the scanners have the flexibility to read current and future microchip technologies in 13 different languages. This innovative software technology allows the scanners to read the codes of all implantable microchips as required by specific markets throughout the world.
-
Automatic channel searching: The Pocket Reader line of products automatically searches for the presence of other manufacturer's microchips, locking in on the specfic channel and reading the microchip.
- Bio-Thermo™: Ability to read Bio-Thermo™ microchips. The Pocket Reader EX reads the ID number as well as the animal's body temperature.
-
RF Surround: The scanner's antenna is designed to surround the microchip in a high intensity magnetic field. This optimizes reading performance with the microchip in any orientation.
-
RS 232 Compatible: Interface with Serial Interface Link or Smart™ Kit allows the user to send ID codes directly from the scanner to a computer.
-
Power Source: The scanners operate on four universally available AAA or AA alkaline batteries.
-
Automatic shut off: The scanners are programmed to automatically shut off when the power level of the batteries is not sufficient enough to read chips.
-
Low cost: The scanners are priced to be affordable for shelters and veterinarians in any size market.
- Ergonomic: The lightweight scanners are desgined to fit easily into the hand of male or female operators to allow for effortless operation with the right or left hand.
- Larger antenna size: The antenna has a larger surface area designed to give greater read range, surface area coverage and speed.
| Operating Frequency: | 125 kHz or ISO 134.2 kHz |
| Case | |
|
|
285 mm L x 80 mm W x 32 mm H |
|
|
406 g |
|
|
RAL 7032 |
|
|
ABS Plastic |
| Operating Temperature: | 0°-50°C |
| Humidity: | 10 - 90% (non-condensing) |
| Storage Temperature: | -20°to 65°C |
| Display: | 16-character LCD |
| Output Port: | Serial field-programmable port |
| RS 232 Port: | Compatible |
| Power Source: | 4 size AA 1.5-volt alkaline batteries, or rechargeable battery pack |
| Accessories: | 60mA battery charger |
 |
Pocket Reader and Pocket Reader EX Manual |  |
|
Pocket Reader EX with Memory |  |
If you would like to obtain more info on the readers, please fill in your details in the spaces provided below and an Identipet specialist will contact you.
