The Injectable Transponder is a passive radio-frequency identification tag, designed to work in conjunction with a compatible radio-frequency ID reading system. The transponder consists of an electromagnetic coil, tuning applicator and microchip sealed in a cylindrical glass enclosure. The chip is pre-programmed with a unique ID code that cannot be altered; over 34 billion individual code numbers are available. When the transponder is activated by low frequency radio signal, it transmits the ID code to the reading system.

This transponder can be used for other applications requiring a micro-sized identification tag.

Compliance:	ISO 11785 Annex A
Dimensions (nominal):	22.5mm by 3.9mm
Housing:	Bio-compatible glass Manufactured in an ISO 9002 approved facility
Average Weight:	0.61g
Temperature range:	-40° to 70°C, operating and storage
Read range with the HS5104L1 MPR Reader¹:	Approximately: 30cm
Read speed:	1 meter per second
Vibration:	Sinusoidal; 1.5mm peak-to-peak, 10 to 80Hz, 3 axis
	Sinusoidal; 10g peak-to-peak, 80Hz to 2kHz, 3 axis
Operating frequency:	125kHz
Power Source:	Passive device energized using an ISO compliant reader
¹(in a benign noise environment with optimal orientation of transponder and scanner)

If you would like to obtain more info on the transponders, please fill in your details in the spaces provided below and an Identipet specialist will contact you.

Name: Country: E-Mail: Tel: country code, area code, tel no., ext. Description of your needs: